Publicité
Les langues disponibles
Les langues disponibles
Connection
1. Connect mains adapter (6V DC
2. Insert batteries (AAA 1.2V NiMH) in accordance with the markings.
3. Charge with the keypad facing outwards (24 hours the first time).
4. Press Menu.
5. Scroll
/
to HS Settings.
{
}
6. Press Select (left menu button).
7. Scroll to Language. Press Select.
8. Scroll to desired setting. Press Select.
9. Press
or Back repeatedly for standby mode.
L
Battery
When the batteries are new and fully-charged (10 hours) they will last for approx. 100 hours' standby time or approx.
10 hours' call time. These times apply at normal room temperature. Full battery capacity will not be reached until the
batteries have been charged 4-5 times. It is not possible to overcharge or damage the batteries by charging them for
"too long".
If the batteries are completely discharged it can take up to 5 minutes' charging before the display lights up.
Battery LED
When the batteries are running low will flash and a warning tone will be heard during calls.
Handset indicator will continue to rotate as long as handset is placed on the base and will not stop when fully charged.
Please note!
USE ONLY WITH PROVIDED ADAPTOR!
When the battery is low or when there is too great a distance to the base unit the telephone will be unable to connect to a
line. Do not place the base unit close to other electrical equipment, in direct sunlight or other strong heat sources! This is to
minimize the risk of any interference. It is normal for the device to become warm during charging and this is not dangerous.
Use only original batteries. The guarantee does not cover any damage caused by using the wrong batteries.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instruction.
The equipment will not work during power cuts, so a corded telephone ought to be used as a back up.
Range
The telephone's range depends on whether or not the radio waves carrying the call are restricted by obstacles in their
path, and is usually between 50 and 300 metres. Coverage can be improved by turning one's head so that the handset
is aligned with the base unit. Sound quality declines as the limit is reached until the call is finally interrupted. The
symbol is shown when the phone is within range and flashes when it is out of range.
The bars beside the
symbol indicate signal strength.
6
Making a call
1. Enter the desired number. Delete if necessary with Clear.
2. Press
to call. Press
Please note!
To switch between speaker/handset, press
to talk.
Receiving a call
1. Wait for the handset to ring.
2. Press
to answer. Press
Arc 7:300mA & Arc 9r:600mA)/phone cable to wall sockets.
to end.
L
/
. In speaker mode, you cannot both speak at once – you must take it in turns
to end.
L
English
6
Publicité
