HSM shredstar X12pro Notice D'utilisation page 11

4 Initial start-up
WARNING
Dangerous mains voltage!
Improper handling of the machine can lead
to an electric shock .
• Only use the machine in a dry room
indoors . Never operate the machine in
damp rooms or in the rain .
• Keep the machine, the plug and cable
away from open fire and hot surfaces.
The ventilation slots must not be blocked
or covered and there must be at least
5 cm space between the shredder and
any wall or furniture .
• Make sure that the power plug is easily
accessible .
• Before you insert the power plug, make
sure that the voltage and frequency
of your power supply comply with the
information on the name plate .
• Insert the CD container provided into the
bracket on the inside of the shredded
material container .
• Plug the power supply into a properly
installed socket using the adapter .
08/2022
5 Operation
Switching on the shredder
• Set mains switch at rear of paper shredder
to "I" .
• Press the operation button .
 The "Ready for operation" indicator
lights up .
Note
Do not use both cutting units at the same
time . Destroy paper and CDs/credit cards
separately .
Shredding paper
Note
You can increase the durability of your
shredder by removing staples and small
paperclips from the paper .
• Feed the paper into the centre of the
paper slot . The light barrier starts the
cutting unit automatically. Therefore, with
thin paper strips, make sure the light bar-
rier detects them .
 If feed opening is free again, the cut-
ting unit shuts down and the shredder
switches to standby .
HSM shredstar
english
11