Publicité
troubleshooting
If one or more functions on the bed base have stopped operating:
Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the
•
base.
Check to ensure the green LED light is illuminated on the control box. If there is no light, verify that the input and power cords are properly
•
connected.
Unplug the base for 1 hour to reset the electronic components.
•
Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical surge protector is
•
recommended).
If issue is not resolved by following the instructions above, locate serial number on warranty card or back of remote and call
16
Customer Service: 1-888-550-3746
Publicité
