Publicité
pair remote
The original remote that comes in the box is already paired to the bed base. No further action is required.
In the event that the remote is not paired with the base, follow the steps below.
STEP 1
Unplug the Power Cord from your power outlet. Wait 1 minute, then
plug it back in to your power outlet. Perform Step 2 within 10 seconds,
while the control box light is flashing.
Power Supply
STEP 2
Press and hold the PAIR button on the
back of the remote. The PAIR button will
illuminate and start to flash. When the PAIR
button stops flashing, the LED light on the
control box will stop flashing. Release the
PAIR button.
12
Power Cord
PAIR button
STEP 3
The remote is now paired to the adjustable base. Test all remote
functions. If the remote buttons do not impact the adjustable base
movements, please repeat the process again.
Publicité
