Publicité
setting up two bases
Connecting straps can be secured to the base frame.
Legs are required for the installation of the connecting straps.
OVERVIEW
If a split setup is being installed, plastic connecting straps are provided (one per base) to secure the
bases together. Use both straps to secure the head and foot portions together.
STEP 1
With the bases in their desired location, slightly loosen both legs to
allow the strap to fit on the leg bolt, between the leg washer and
frame.
14
STEP 2
Slide side (a) of the connecting strap onto leg bolt. Swing the strap and
connect side (b) to the leg bolt. Secure the strap by shifting to the left.
a
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining strap and repeat
on other end of the base.
b
Publicité
