Publicité
emergency battery backup strap
For emergency use only, in case of a power outage.
Batteries are not to be used for normal operation of the bed.
STEP 1
Disconnect the Power Supply from the input power cord.
STEP 2
Connect the Battery Backup Strap to the (2) Alkaline 9 Volt batteries. Do
not mix brand name Batteries.
STEP 3
Connect the end of the Battery Backup Strap to the input power cord that
is attached to the control box.
Battery Backup Strap
Input Cord
Note: Detach the Battery Backup Strap after the emergency is over, as the
system will continue to draw power from the batteries even if not in use.
Control Box
13
Publicité
