Publicité
installation guide
STEP 7
Carefully flip the base over. Important: Two people are required to move the
bed base. Do not drag across the floor. Do not rest frame on its side, excessive
pressure may damage the legs.
STEP 8
Plug the power cord into a power source. A surge protector is
recommended.
STEP 9
Quickly test remote functions to verify proper setup before placing
mattress on base. Return the base to a flat position before placing the
mattress on top.
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
STEP 10
Insert each end of the mattress retainer bar into the inserts at the foot of
the base until the retainer bar is secured in place.
Setup is now complete! Test all functions on remote.
9
Publicité
