Tilling Problems - Honda FRC800 Manuel Du Propriétaire

TAKING CARE OF UNEXPECTED PROBLEMS

TILLING PROBLEMS

Possible Cause
Engine speed is too slow to till well.
Tiller is moving too fast for soil
conditions.
Drag bar set too high.
Tines dull, worn, or damaged.
Wrong tines installed.
Tines installed incorrectly.
62
Correction
Move the throttle to the FAST position
(p. 15).
Shift to slower speed (p. 24).
Lower the drag bar (p. 26).
Replace tines if necessary (p. 51).
Install correct tines (p. 51).
Install tines correctly (p. 51).