Main Clutch Cable Adjustment - Honda FRC800 Manuel Du Propriétaire

SERVICING YOUR TILLER
If reinstalling a used spark plug, tighten 1/8 — 1/4 turn after the
spark plug seats.
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats.
TORQUE: 13 lbf·ft (18 N·m, 1.8 kgf·m)
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the cylinder
head.
8.Attach the spark plug cap.
9.Reinstall the air cleaner cover, and tighten the wing nut securely.

MAIN CLUTCH CABLE ADJUSTMENT

Adjust the handlebar height to the third hole from the bottom (see page
23).
There should be 3/16 — 9/16 inches (5—15 mm) of free play at the lever
end. If lever adjustment is incorrect, loosen the lock nut and turn the
adjusting nut in or out just enough to eliminate free play. Do not
overtighten.
3/16 – 9/16 in (5 – 15 mm)
42
ADJUSTING NUT
LOCK NUT