Transmission Oil Level Check - Honda FRC800 Manuel Du Propriétaire

TRANSMISSION OIL LEVEL CHECK

Check the transmission oil level with the tiller on a level surface and the
engine stopped.
1.Remove the transmission oil level check bolt and sealing washer. The
oil should be level with the lower edge of the oil level check hole.
2.If the oil level is low, remove the transmission oil filler cap and add
the same type of oil recommended for the engine (see page 36).
3.Reinstall the oil filler cap. Reinstall the oil level check bolt and a new
sealing washer, and tighten the bolt securely.
OIL FILLER HOLE
SERVICING YOUR TILLER
TRANSMISSION
OIL FILLER CAP
TRANSMISSION OIL
LEVEL CHECK BOLT
SEALING WASHER
(Replace)
LEVEL
37