Main Clutch Lever; Gearshift Lever; Drag Bar - Honda FRC800 Manuel Du Propriétaire

CONTROLS

Main Clutch Lever

MAIN CLUTCH LEVER
The main clutch lever engages and
disengages the transmission that
DISENGAGED
drives the tines.
The tiller tines begin to rotate once
the engine is started and the clutch
ENGAGED
lever is squeezed. The tines may
momentarily rotate after clutch
lever is released.

Gearshift Lever

The transmission offers a choice
of three forward speeds, neutral,
and one reverse speed. Shift lever
GEARSHIFT LEVER BRACKET
positions are indicated on the
gearshift lever bracket.
GEARSHIFT LEVER

Drag Bar

The drag bar controls tilling depth
and should always be used when
tilling. It enables you to
compensate for the hardness of
the soil, and proper adjustment is
DRAG BAR
critical to prevent the tiller from
jumping forward. Ideal drag bar
height will depend on the type of
soil being tilled and soil conditions
at the time of tilling. In general,
the drag bar should be adjusted so
LOCKING BOLT
that the tiller is tilted slightly
backward.
LOCKING NUT
16