Publicité
Les langues disponibles
Les langues disponibles
PREPARE THE CABINET (
5 . Install the cabinet brackets as follow (FIG . 9):
Align the bracket flush with the bottom of the right
cabinet side panel, with the hooks marked position (E)
between the bottom embossed holes . For the narrow
edge configuration, trace a line on the top of the
bracket . For wide edge configuration, trace a line at the
bottom of the central slots .
Lift the bracket flush with the marked lined . Assemble
the bracket to the cabinet side panel using 2 no . 8 x 5/8"
wood screws (included in parts bag) through the upper
holes .
NOTE: Do not use the embossed holes to atttach the
bracket to the cabinet .
Repeat steps to for the left cabinet side panel .
8
'
)
cont
d
Narrow edge
configuration
FLUSH
Wide edge
configuration
FLUSH
HO0414
E
E
FIG. 9
Publicité
