Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

CHIMNEY
RANGE HOOD
READ AND SAVE THESE INSTRUCTIONS
VQ0009
WARNING
!
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSON(S) OBSERVE THE
FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer at the
address or telephone number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service
panel and lock service disconnecting means to prevent
power from being switch on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service
panel.
3. Installation work and electrical wiring must be done by
qualified personnel in accordance with all applicable codes
and standards, including fire-rated construction codes and
standards.
4. Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent backdrafting. Follow the heating equipment
manufacturer's guidelines and safety standards such as
those published by the National Fire Protection Association
(NFPA), the American Society for Heating, Refrigeration
and Air Conditioning Engineers (ASHRAE) and the local
code authorities.
5. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
6. Ducted fans must always be vented to the outdoors.
7. Do not use this unit with any other solid-state speed control
device.
8. To reduce the risk of fire, use only steel ductwork.
9. This unit must be gounded.
TO REDUCE THE RISK OF A RANGE TOP GREASE
FIRE:
a) Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that may
ignite. Heat oils slowly on low or medium settings.
b) Always turn hood ON when cooking at high heat or when
cooking flaming foods (i.e. Crêpes Suzette, Cherries Jubilee,
Peppercorn Beef Flambé).
c) Clean ventilating fans frequently. Grease should not be
allowed to accumulate on fan or filters.
d) Use proper pan size. Always use cookware appropriate for
the size of the surface element.
INSTALLER: LEAVE THIS GUIDE TO THE HOMEOWNER.
HOMEOWNER: OPERATION AND MAINTENANCE INFORMATION ON PAGE 8.
To register this product visit:
www.broan.com
I
!
ntended for domestIc cookIng only
MODELS B5630SS • B5636SS • B5730SS • B5736SS
HB0066
WARNING
!
VQ0009
TO REDUCE THE RISK OF INJURY TO PERSON(S)
IN THE EVENT OF A RANGE TOP GREASE FIRE,
OBSERVE THE FOLLOWING*:
1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or
metal tray, then turn off the burner. BE CAREFUL TO PREVENT
BURNS. IF THE FLAMES DO NOT GO OUT IMMEDIATELY,
EVACUATE AND CALL THE FIRE DEPARTMENT.
2. NEVER PICK UP A FLAMING PAN – You may be burned.
3. DO NOT USE WATER, including wet dishcloths or towels –
This could cause a violent steam explosion.
4. Use an extinguisher ONLY if:
A. You know you have a Class ABC extinguisher and you
know how to operate it.
B. The fire is small and contained in the area where it
started.
C. The fire department has been called.
D. You can fight the fire with your back to an exit.
* Based on "Kitchen Fire Safety Tips" published by NFPA.
CAUTION
1. For indoor use only.
2. For general ventilating use only. Do not use to exhaust
hazardous or explosive materials and vapors.
3. To avoid motor bearing damage and noisy and/or
unbalanced impeller, keep drywall spray, construction dust,
etc. off power unit.
4. Do not use over cooking equipment greater than 60,000
BTU/hr. as the blower motor will shut down intermittantly.
5. Your hood motor has a thermal overload which will
automatically shut off the motor if it becomes overheated.
The motor will restart when it will cool down. If the motor
continues to shut off and restart, have the hood serviced.
6. The bottom of the hood MUST NOT BE LESS than 30" and
at a maximum of 36" above cooktop for best capture of
cooking impurities.
7. Two installers are recommended because of the size of
this hood.
8. To reduce risk of fire and to properly exhaust air, be sure
to duct air outside. Do not exhaust air into spaces within
walls or ceilings or into attics, crawl spaces, or garages.
9. Be careful when installing the decorative flue and hood, they
may have sharp edges.
10. Please read specification label on product for further
information and requirements.
HB0067
.
!
VQ0009
Page 1

Publicité

Table des Matières
loading

Sommaire des Matières pour Broan B5630SS

  • Page 1 MODELS B5630SS • B5636SS • B5730SS • B5736SS Page 1 CHIMNEY To register this product visit: www.broan.com RANGE HOOD HB0066 HB0067 READ AND SAVE THESE INSTRUCTIONS ntended for domestIc cookIng only VQ0009 VQ0009 WARNING WARNING VQ0009 VQ0009 TO REDUCE THE RISK OF FIRE, ELECTRIC...
  • Page 2: Prepare The Hood

    MODELS B5630SS • B5636SS • B5730SS • B5736SS Page 2 INSTALL THE DUCTWORK (Ducted Hoods Only) PREPARE THE HOOD Unpack hood and check contents. You should receive: 1. Decide where ROOF CAP 1 - Hood the ductwork 1 - Glass Canopy (Models B5630SS & B5636SS) 6”...
  • Page 3 MODELS B5630SS • B5636SS • B5730SS • B5736SS Page 3 INSTALL THE WIRING INSTALL THE HOOD MOUNTING BRACKET WALL STUDS FRAMING BEHIND DRYWALL 8 ¼ ” M A X . ⁄ ” 9” ⁄ ” ⁄ ” to 48 ⁄...
  • Page 4: Install Upper Flue Mounting Bracket

    MODELS B5630SS • B5636SS • B5730SS • B5736SS Page 4 INSTALL THE HOOD INSTALL UPPER FLUE MOUNTING (Horizontally Ducted Hoods Only) BRACKET 1. DO NOT REMOVE the protective plastic film covering the Ceiling Center of installation decorative flue and the hood at this time.
  • Page 5 MODELS B5630SS • B5636SS • B5730SS • B5736SS Page 5 UPPER FLUE MOUNTING BRACKET FRONT VIEW 6” ROUND ELBOW UPPER FLUE flue mounting bracket. The bracket should be inside the flue. HO0104 Secure the upper flue to the upper flue mounting bracket using (2) no.
  • Page 6 MODELS B5630SS • B5636SS • B5730SS • B5736SS Page 6 UPPER FLUE MOUNTING BRACKET 6” ROUND STEEL DUCT UPPER FLUE DUCT LENGTH DECORATIVE FLUE 8. Measure and install steel ductwork to hood duct connector. Use duct tape to make all joints secure and air tight.
  • Page 7 MODELS B5630SS • B5636SS • B5730SS • B5736SS Page 7 6. Remove the 14. Hold hood up close to wall mounting location and plug grease filters power cord into wall outlet. by pulling 15. Align the hood and center it above the hood mounting down the bracket.
  • Page 8: Light Bulbs

    MODELS B5630SS • B5636SS • B5730SS • B5736SS Page 8 LIGHT BULBS MAINTENANCE Grease Filters Grease filters should be cleaned monthly. Remove grease LIGHT BULB COVER filters by pulling down on the metal latch tab. This will disengage the filter from the hood. Tilt the filter downward and remove.
  • Page 9: Service Parts

    BROAN-NUTONE ONE YEAR LIMITED WARRANTY Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
  • Page 10: Lire Ces Directives Et Les Conserver

    MODÈLES B5630SS • B5636SS • B5730SS • B5736SS Page 10 HOTTE DE Pour enregistrer ce produit, visitez : www.broan.com CUISINE À CHEMINÉE HB0066 HB0067 LIRE CES DIRECTIVES ET LES CONSERVER our usage domestIque seulement VQ0009 VQ0009 AVERTISSEMENT AVERTISSEMENT VQ0009 VQ0009 AFIN DE RÉDUIRE LES RISQUES D’INCENDIE, DE CHOC...
  • Page 11: Installation Des Conduits

    CAPUCHON DE TOIT 1 - Hotte déterminant CONDUIT ROND 1 - Capot en verre (modèles B5630SS et B5636SS) son tracé entre 15,2 1 - Capot en métal (modèles B5730SS et B5736SS) la hotte et 1 - Conduit décoratif de cheminée l’extérieur de la...
  • Page 12: Installation Du Câblage

    MODÈLES B5630SS • B5636SS • B5730SS • B5736SS Page 12 INSTALLATION DU CÂBLAGE INSTALLATION DE LA BRIDE DE MONTAGE DE LA HOTE POTEAUX MURAUX CHARPENTE DERRIÈRE LA CLOISON SÈCHE M A X . 2 1 C M ( 8 ¼ P O...
  • Page 13 MODÈLES B5630SS • B5636SS • B5730SS • B5736SS Page 13 INSTALLATION DE LA HOTTE INSTALLATION DE LA BRIDE DE MONTAGE (hotte à conduits horizontaux seulement) DE CONDUIT DÉCORATIF SUPÉRIEUR 1. N’ENLEVEZ PAS À CETTE ÉTAPE la pellicule protectrice en Plafond Centre de l’installation...
  • Page 14 MODÈLES B5630SS • B5636SS • B5730SS • B5736SS Page 14 BRIDE DE MONTAGE DU CONDUIT DÉCORATIF SUPÉRIEUR COUDE ROND DE 15,2 CM (6 PO) CONDUIT DÉCORATIF SUPÉRIEUR 14. Glissez le conduit décoratif supérieur vers le haut jusqu’à ce qu’il HO0104 soit aligné...
  • Page 15 MODÈLES B5630SS • B5636SS • B5730SS • B5736SS Page 15 BRIDE DE MONTAGE DE CONDUIT DÉCORATIF SUPÉRIEUR CONDUIT ROND DE 15,2 CM CONDUIT (6 PO) EN ACIER DÉCORATIF SUPÉRIEUR LONGUEUR DU CONDUIT CONDUIT DÉCORATIF 8. Mesurez et fixez le conduit en acier sur le raccord de la hotte.
  • Page 16 MODÈLES B5630SS • B5636SS • B5730SS • B5736SS Page 16 6. Enlevez les 14. Soulevez la hotte, maintenez-la près de son emplacement et filtres à graisse branchez son cordon électrique dans la prise. en tirant vers le bas sur 15. Alignez la hotte et centrez-la au-dessus de sa bride de montage.
  • Page 17: Entretien

    MODÈLES B5630SS • B5636SS • B5730SS • B5736SS Page 17 AMPOULES ENTRETIEN Filtres à graisses Les filtres à graisses doivent être nettoyés une fois par mois. COUVERCLE DES Enlevez les filtres à graisse en tirant vers le bas sur la languette AMPOULES métallique de retenue.
  • Page 18: Pièces De Rechange

    GARANTIE LIMITÉE DE UN AN DE BROAN-NUTONE Broan-NuTone garantit à l’acheteur consommateur original de ses produits qu’ils sont exempts de vice de matériaux ou de fabrication pour une période d’un an à compter de la date d’achat original. IL N’Y A PAS D’AUTRES GARANTIES, EXPRIMÉES OU IMPLICITES, INCLUANT MAIS NON LIMITÉES AUX GARANTIES IMPLICITES DE QUALITÉ...
  • Page 19 MODELOS B5630SS • B5636SS • B5730SS • B5736SS Página 19 CAMPANA DE Para registrar este producto visite: www.broan.com ESTUFA DE CHIMENEA HB0066 HB0067 LEA Y CONSERVE ESTAS INSTRUCCIONES ndIcada solamente Para cocInar en casa VQ0009 VQ0009 ADVERTENCIA ADVERTENCIA VQ0009 VQ0009...
  • Page 20: Prepare La Campana

    Debe contener lo siguiente: instalará el TAPA DE TECHO 1 - campana conducto entre CONDUCTO REDONDO DE 1 - cubierta de vidrio (Modelos B5630SS y B5636SS) la campana y . (15.2 PULG 1 - cubierta de metal (Modelos B5730SS y B5736SS) el exterior.
  • Page 21: Instale El Soporte De Montaje De La Campana

    MODELOS B5630SS • B5636SS • B5730SS • B5736SS Página 21 INSTALE EL CABLEADO INSTALE EL SOPORTE DE MONTAJE DE LA CAMPANA MONTANTES DE PARED MARCO DETRÁS DE LA PLACA DE YESO 8 ¼ p u l g . ( 2 1 c m ) M á...
  • Page 22 MODELOS B5630SS • B5636SS • B5730SS • B5736SS Página 22 INSTALE LA CAMPANA (sólo para INSTALE EL SOPORTE DE MONTAJE DEL TUBO DE HUMOS SUPERIOR campanas con conductos horizontales) 1. En este momento NO QUITE la película de plástico protector que Cielo raso Centro de la instalación...
  • Page 23 MODELOS B5630SS • B5636SS • B5730SS • B5736SS Página 23 SOPORTE DE MONTAJE DEL TUBO DE HUMOS SUPERIOR CODO REDONDO DE 6 PULG. (15.2 CM) TUBO DE HUMOS SUPERIOR 14. Deslice el tubo de humos superior hacia arriba, hasta que quede HO0104 alineado con su soporte de montaje superior.
  • Page 24 MODELOS B5630SS • B5636SS • B5730SS • B5736SS Página 24 SOPORTE DE MONTAJE DEL TUBO DE HUMOS SUPERIOR CONDUCTO REDONDO DE ACERO DE 6 PULG. (15.2 CM) TUBO DE HUMOS LONGITUD SUPERIOR DEL CONDUCTO TUBO DE HUMOS DECORATIVO 8. Mida e instale los conductos de acero al conector de conductos de la campana.
  • Page 25 MODELOS B5630SS • B5636SS • B5730SS • B5736SS Página 25 6. Retire los 14. Sostenga la campana cerca de la ubicación de montaje en la pared filtros de grasa y conecte el cordón eléctrico en el tomacorriente. estirando hacia abajo la cejilla 15.
  • Page 26 MODELOS B5630SS • B5636SS • B5730SS • B5736SS Página 26 BOMBILLAS MANTENIMIENTO Filtros de grasa Los filtros de grasa deben limpiarse una vez al mes. Retire CUBIERTA DE LA BOMBILLA DE LUZ los filtros de grasa estirando hacia abajo le cejilla metálica.
  • Page 27: Piezas De Repuesto

    Esta garantía le proporciona derechos legales específicos, y usted puede también tener otros derechos, los cuales varían de estado a estado. Esta garantía reemplaza todas las garantías anteriores. Para calificar en la garantía de servicio, usted debe (a) notificar a Broan-NuTone al domicilio o al número de teléfono que se menciona abajo, (b) dar el número del modelo y la identificación de la pieza, y (c) describir la naturaleza de cualquier defecto en el producto o pieza.
  • Page 28 99526963C...

Ce manuel est également adapté pour:

B5636ssB5730ssB5736ss

Table des Matières