Publicité
Les langues disponibles
Les langues disponibles
REMOVE THE ADAPTER/DAMPER
AND 6-IN . ROUND DAMPER
Detach and set aside the 3¼" x 10" adapter/damper and the
6-in .-round damper (grey parts in FIG . 2) from back and side
of the powerpack insert by removing their 2 retaining screws .
Discard the screws .
REMOVE THE CABINET BRACKETS
Detach the cabinet brackets (grey part in FIG . 3) from the back
of the powerpack insert by removing its 3 retaining screws .
Discard the screws .
Fold up and down the bracket until it is split in two separate
parts (FIG . 4) . Keep the brackets for possible further use .
NOTE: Both cabinet brackets have one wide edge and one
narrrow edge (FIG . 5), to cover all installation
configurations depending on cabinet widths .
6
HD1459
SCREWS
HD1410
HO0413
Narrow edge
Wide edge
HO0408
FIG. 2
FIG. 3
FIG. 4
FIG. 5
Publicité
