OPERATION
Before first use
•
Before using the refrigerator for the first time, let it stand for half an hour
before connecting it to the power supply.
•
Before you put fresh or frozen food in it, the refrigerator should be in
operation for 2 to 3 hours, or even over 4 hours in summer when ambient
temperatures are high.
•
In the event of a power outage or to clean the device, remove the plug from
the mains socket. To avoid damage to the compressor from consecutive starts,
do not connect the refrigerator to power within five minutes.
Adjusting the thermostat
•
Turn the knob to "MAX" to lower the
temperature inside the refrigerator.
Turn the knob to "MIN" to increase the
temperature inside the refrigerator.
•
The markings on the knob only represent
the temperature level, not the specific
temperature. If the rotary knob is set to
"OFF", the compressor will no longer run.
•
Select a temperature setting between
"MAX" and "MIN".
•
Recommended temperature level: "MED".
EN
35