INSTALLATION
Installation instructions
•
Before use, remove all packaging materials, including bottom pads, foam
pads, and tape inside the refrigerator. Peel the protective film off the doors
and refrigerator housing.
•
Keep the refrigerator away from heat and avoid direct sunlight. To avoid rust
or reduction in insulation effect, do not place the refrigerator in damp or wet
places.
•
To avoid affecting the electrical insulation properties of the refrigerator, do not
place the refrigerator in damp places that are easily splashed with water.
•
The refrigerator should be placed in a well-ventilated indoor location. The
floor must be level and stable (turn the adjustable feet left or right to level the
device if it is unstable).
•
The distance from the top of the refrigerator must be more than 30 cm, and
the refrigerator should be placed against a wall with a clearance of more than
10 cm to facilitate heat dissipation.
•
Leave enough space for the doors and drawers to open easily.
Dimensions:
180°
918.5mm
EN
31