KaWe MASTERMED A1 Mode D'emploi page 16

ENGLISH
7.2. Stand installation
1) Put on the black plastic cap.
2
2) Mount two foot tubes with brake
castors opposite each other.
www.kawemed.com
3) Mount three foot tubes without brake castors.
4) Screw in hexagon screw.
6) Place the manometer onto
the stand post.
8
8) Adjust the height as required.
16
5) Tighten hexagon screw.
7) For a firm stand, lock the brake
castors. To move forward, release the
brake castors.
7