KaWe MASTERMED A1 Mode D'emploi page 14

ENGLISH
• Protect the device from strong shocks (do not bump or
drop it).
• The pointer on the gauge must point within the tolerance
range of the zero position when there is no air in the system.
• Always let all of the pressure out of the cuff before storing
the device.
• Never inflate to more than 300 mmHg!
• Measurement time should be maximum 2 minutes.
• The break between two measurements should be
minimum 2 minutes.
• When replacing or repairing parts, please ensure that only
original KaWe replacement parts are used.
• Make sure that the tube system is airtight.
Modification of the device and/or accessories is
not permitted!
Otherwise that can lead to measuring errors.
www.kawemed.com
14