Beko HII64400QT Manuel D'utilisation page 7

• When you need to transport
the product, wrap it with
bubble wrap packaging mater-
ial or thick cardboard and tape
it tightly. Secure the moving
parts of the product firmly to
prevent damage.
• Before the product is installed,
check the product for any
damage after transport. Con-
tact the importer or the au-
thorized service centre if dam-
aged.
1.5 Installation Safety
• Before beginning the installa-
tion, de-energize the power
line to which the product will
be connected by turning off
the fuse.
• Always wear protective gloves
during transport and installa-
tion. Otherwise there is a risk
of injury from sharp edges!
• Before the product is installed,
check the product for any
damage. Do not have it in-
stalled if the product is dam-
aged.
• Avoid using any heat-insulat-
ing materials to cover the in-
terior of the furniture that will
be installed.
• Direct sunlight and heat
sources, such as electric or
gas heaters, must not be
present in the area where the
product is installed.
• Keep the surroundings of all
ventilation ducts of the
product open.
• Do not install the product near
a window. There is a risk that
the hob flame will ignite cur-
tains and flammable materials
around the hob. When you
open the window, hot cook-
ware may tip over.
• Do not install the product near
a window. When you open the
window, hot cookware may tip
over.
• If there is a socket behind the
place where the product will
be installed, it must be en-
sured that the product does
not come into contact with the
socket nor with the plug
plugged into the socket.
• There should be no gas hose,
plastic water pipe and socket
on the back or side wall of the
place where the product will
be installed. Otherwise, they
may be deformed by the heat
effect when the hob is oper-
ated and may create a safety
risk.
EN / 7
EN
IT
FR
CS