Beko HII64400QT Manuel D'utilisation page 24

Error codes
E 1 – E 15
E 16 – E 21
E 23
E 24
E 25
E 31 – E 45
E 48
E 49
E 51
E 52 – E 57
Error reasons
Communication error on induction
hob.
Temperature sensor error on induc-
tion hob.
Software error on induction hob.
Fan operation error on induction hob.
Electronic board hardware error on
induction hob.
Sensor error on induction hob.
High temperature error on induction
hob.
EN / 24
Possible solutions
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Sensor equipment shall be rendered
compatible for the operating condi-
tions. Contact the authorized dealer-
ship if the issue is resumed.
Turn the induction hob off and wait
until it is cooled down. The error shall
be resolved when temperature of the
sensor comes down below the limits.
Contact the authorized dealership if
the issue is resumed.
EN
IT
FR
CS