Publicité
Les langues disponibles
Les langues disponibles
5. PANELS MOUNTING
>
Hook the bottom drawer panel starting from
the adjustment bolts on the bottom [ 2 ].
2
>
It is now possible to align panels to adjacent
cabinets in height using the lower alignment
bolts and brackets, [ 3 ] tightening or untight-
ening the screws into position as needed. With
the screw slighty tightened, move the panel
sideways manually to align it to the other pan-
els on the unit or other adjacent structures. Set
the bottom adjustment bolts using the lock nut
once you are happy with the height alignment.
3
>
Depth alignment: working from the in-
side of the drawer, after lifting up the
magnetic seal or rotating the cover plate
where necessary, adjust the panel position
in the Z-direction by adjusting the shoul-
der bolts and setscrews with the 4mm hex
key in conjunction with each other finally
locking each mounting position in place [ 4 &
5 ].
4
5
www.smeg.com
EN
25
Publicité
