Publicité
Les langues disponibles
Les langues disponibles
5. PANELS MOUNTING
5.5. Panels dimensions: single bottom-drawer
Panels can have thickness ranging between 18 mm (3/4") and 28 mm (1-1/8").
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum weight of
11kg (25 lbs). Exceeding these weights could void your warranty for any service issues which can be attrib-
uted to overweight panels.
The hinging mechanism on SMEG appliances is considered to be `Zero-clearance`. The door and drawer
widths specified below assume the minimum cutout width is being used and a 3.5mm (1/8") reveal is de-
sired around the panels. Adjust your panel dimensions accordingly to your own design criteria considering
your cutout width and your reveal. Minimum reveal / gap should not be less than 1.5mm (1/16").
SERIES
DOOR/DRAWER WIDTH A
36"
908 (35 3/4")
30"
756 (29 3/4")
Example:
84" cutout height
36" cutout width
4" toe kick height
1/8" gap desired all around
22
DOOR CUTOUT WIDTH B
627 (24 3/4")
477 (18 3/4")
3 ( ⁄ ")
A
Door panel:
Width: 35-3/4"
Height: 54-3/4"
Drawer panel:
Width: 35-3/4"
Height: 84"-1/8"-54-3/4"-1/8"-4"=25"
If you want a 6" toe kick height then your bottom drawer
panel height would be 23"
www.smeg.com
min 200 (7 ⁄ ")
135
135
(5 ⁄ ")
(5 ⁄ ")
115 (4 ½")
B
Publicité
