Thermic Energy TE380234W Instructions De Montage Et D'utilisation page 38

> Compliance with the specified maximum temperatures and pressures
> Inspection and replacement of the magnesium anode
Loss of warranty and warranty on enamelled storage occurs when:
> the connections are not carried out correctly
> no magnesium anode or external current anode was installed or its installation was faulty
> the drinking water has a chloride content of >70 mg CI/L
> the drinking water does not have a pH value according to the Drinking Water Ordinance 6.5 - 9.5
(DIN EN ISO 2788 (1993-11))
PACKAGING
Our stores are all standing / lying bolted and packed on a pallet. Do not store storage outdoors, but
in dry, frost-free and ventilated rooms.
All packaging materials used are recyclable and are for transport only. Foil, screws etc. must be
completely removed before installation. A misuse of the packaging material is not permitted.
DISPOSAL INSTRUCTIONS
The packaging waste is to be redirected to the appropriate recycling process via certified waste
facilities according to the regulatory framework.
After final decommissioning drinking water storage tanks do not belong into domestic rubbish.
Please contact your heating contractor for information about professional disposal or transferring
the tank to a suited collection point to ensure an environmentally compatible disposal.
Operating material (e.g. heat transfer media) can be disposed via the municipal collection point.
TECHNICAL DATA
Our drinking water storage tanks are equipped according to DIN 4753 and DruckbehV up to two
permanently welded plain tube heat exchangers
The tanks were manufactured from high-grade steel S235JR and were glass-enamelled internally to
ensure hygienic drinking water (quality-secured according to DVGW 511 and DIN 4753). Our buffer
tank is equipped with a magnesium anode to protect against corrosion. In addition a thermometer
is located in the upper buffer tank area.
Our buffer tank has return has all of the connections necessary for cold and warm water, heating
flow and return and circulation. Inspection doors are available in all of our buffer tanks, complete
with blank caps. One/two protection tube(s) are available on the tank to accept sensor tube (s) that
control the system. The thermal insulation (CFC-free) can, depending on the buffer tank model,
consist of 50 mm or 75 mm of PU foam or rigid foam composite insulation (HVI) and fleece insula-
tion. AAll drinking water storage tanks can be supplied with height-adjustable feet.
All dimensions for the buffer tanks are subject to a manufacturing tolerance and can differ by +/- 5
mm.
TECHNICAL DOCUMENTATION
Should you need any other technical documentation, please contact your supplier.
38
Similar pictures. Subject to technical changes and changes to content, misprints and errors.