Tineco PURE ONE S15 PRO Serie Mode D'emploi page 27

2.After removing the brush roller, gently clean
the brush window, suction mouth and the row
of plastic teeth.
Fig.E-14
3.Fully reinsert the brush roller into the brush
window and the end cover can be rotated
clockwise until it clicks securely back into place.
Fig.E-15
Warning:
• The power brush contains electrical
components which must not be soaked or
washed with water.
• Turn the power off and remove the battery
before performing maintenance for the brush
roller.
• To reduce the injury, do not touch the brush
roller while the appliance is in working
condition.
TROUBLESHOOTING
Problem
The appliance does
not turn on
Weak suction power
Abnormal sounds or
plastic teeth tangled
in brush
Suction mouth blocked
Solution
Charge the battery
Restart after cooling down
Check and remove
blockages
Clean the dustbin and
filters
Install the pre-filter
Remove blockages
Clean the brush roller
Pull out the brush roller
and remove blockages
Remove the mesh
filter, clean the suction
mouth and dustbin
Problem
Battery won't charge
Brush roller tangled
Voice prompt:
Brush roller tangled,
please clean the brush
Air channel blocked
Voice prompt:
Air channel blocked,
please clean the air
channel and dustbin
Dust sensor
malfunction
Voice prompt:
Dust sensor
malfunction, please
clean the dust on the
inner sensor
Battery indicator
blinking red on work
Battery indicator
blinking red during
charging
Abnormal motor
sounds
Note:
If the above troubleshooting guide fails to
provide a solution, please visit our website
www.tineco.com for further support.
25
Solution
Reinsert the adaptor
correctly
Check the main
body and battery are
correctly placed
Use the original
adaptor
Remove blockages
Remove blockages
Clean the dust on the
inner sensor
Install the dustbin
correctly
Remove the battery
pack and let it cool
Use the original
adaptor
Remove blockages