Husqvarna 525iLST Manuel D'utilisation page 15

To cut the grass
1. Make sure that the grass trimmer line is parallel to
the ground when you cut.
2. Do not push the trimmer head to the ground. The
ground and the product can be damaged.
3. Do not let the trimmer head touch the ground
continuously, it can cause damage to the trimmer
head.
4. Use full speed when you move the product from side
to side to cut grass.
Make sure that the grass trimmer line is parallel to
the ground.
To sweep the grass
The airflow from the rotating trimmer line can be used to
remove cut grass from an area.
1. Hold the trimmer head and the trimmer line parallel
to the ground and above the ground.
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
1920 - 002 - 16.05.2024
Maintenance
Before you do any
2. Apply full speed.
3. Move the trimmer head from side to side and sweep
the grass.
WARNING:
cover each time you assemble new trimmer
line to prevent unbalance and vibrations in
the handles. Also do a check of the other
parts of the trimmer head and clean it if
necessary.
To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Put the product in the stop position.
3. Push the stop button.
4. Push the release buttons on the battery and pull the
battery out.
Maintenance schedule
WARNING:
you do maintenance.
Clean the trimmer head
Remove the battery before
15