Parkside PSHP 1 A1 Consignes D'utilisation Et De Sécurité page 11

ATTENTION! Materials
which come into contact with
the skin of the wearer can cause
allergic reactions for sensitive
individuals.
ATTENTION! Eye protection
equipment against high-speed
particles can pose a danger
for the wearer through transfer
of impact if they are worn over
standard prescription glasses.
ATTENTION! If protection
against high-speed particles at
extreme temperatures is neces-
sary, the selected eye protection
equipment must be marked with
the letter T in accordance with the
letters relating to impact intensity,
i.e. FT, BT or AT. If the letter for
impact intensity is not followed
with the letter T, the eye protection
equipment must only be used at
room temperature against high-
speed particles.
 Using the device
Please note: Only use the welding helmet
with the rear lens
4
Please note: Keep the arc sensors
the UV fi lter clean.
8
After opening the package, immediately
check to ensure that the package contents
are complete and are in perfect condition.
Contact your dealer immediately if the
package contents is incomplete or has
any defects. Do not use the device if it is
defective.
GB/IE/NI/CY/MT
fi tted.
16
11
of