Publicité
Les langues disponibles
Les langues disponibles
● Power Booster
The product features a supplementary power level (after
level
), which remains active for 5 minutes, after which
the temperature returns to the previously set value.
Touch and slide your fingers along the Selection bar (3)
(beyond level
) and activate the Power Booster. The
Power Booster level is indicated in the Selection / Display
area (2) with the symbol
Note: The Booster CANNOT be activated in these zones:
mod.603 zone RL; mod.604 zones FL and RR; mod.604P
zone RR.
● Cooking Zone Timer
The Cooking Zone Timer function is a countdown that can
be set, even simultaneously, on each cooking zone. At the
end of the period set, the cooking zones switch off
automatically and the user is notified with a dedicated
acoustic signal.
Activation of the cooking zone timer function
• Touch (press) the Selection/Display area (2) (power
level other than zero)
• Press
(6) relating to the cooking zone
• Use the symbols
Timer, which is shown in the Zone/Display (4); while
setting, the symbol
(6) flashes.
Note: wait 10 seconds without pressing any other
command, so that the Cooking Zone Timer will start.
Note: by pressing and holding
zone Timer is reset.
If desired, repeat the operation for several cooking
zones:
Each cooking zone can have a different Timer set; in the
display (4) the countdown of the cooking zone selected at
that moment will appear; if no zone is selected, press the
Display (4) to view the STAND-ALONE Timer countdown.
When the timer has finished the countdown, an acoustic
signal sounds and the cooking zone switches off.
To switch off the Timer:
• select the cooking zone (2)
• set the duration of the Timer to
(5).
The countdown display mode is the same as for the
STAND-ALONE Timer.
● "STAND ALONE" Timer
The Timer function is a countdown independent of the
cooking zones.
The Timer is activated by pressing the Zone/Display (4).
Use the symbols
.
(5) to set the duration of the
(6) again, the cooking
, using
(5) to set the duration of the
Timer, which is shown in the Zone/Display (4)
Note: wait 10 seconds without pressing any other
command, so that the countdown starts.
The Timer can be set up to a maximum of 1(h) and
59(min.) The Zone/Display (4) will show the remaining
time; an acoustic signal will be emitted at the end of the
countdown.
Note: When the remaining time is less than 10 minutes, a
fixed dot will appear in the timer after the first number.
Displayed value
To switch off the Timer:
• select Zone/Display (4)
• set the duration of the Timer to Zero
(5)
● Bridge Zones
Thanks to the Bridge function, the cooking zones can
operate in a combined way, creating a single zone with the
same power level. This function allows evenly distributed
cooking with large-sized pots and pans.
It is possible to use the front cooking zone in combination
with the corresponding rear one (to check which zones
feature this function, see the illustrated part of this manual).
To activate the Bridge Function:
• simultaneously select both cooking zones you wish
to use
• the Display (2) of the "rear" cooking zone will show the
symbol
• using the Selection bar (3), it will be possible to set the
operating Level (Power), which will be shown on the
Display (2) of the "front" zone
To disable the Bridge Function, simply repeat the activation
procedure
Note: the Cooking Zone Timer, activated during the Bridge
Function, causes the automatic shut-down of both cooking
zones, as in this case they are considered a single
combined area.
Note: the Bridge function IS NOT available in
Mod.603-604
● Power Limitation
The Power Limitation function allows the product to be
used while limiting its maximum absorption, adjusting the
absorbed power in all active cooking zones, ensuring that
the total absorbed power of the hob does not exceed the
set maximum absorption level.
Note: the setting must be made with the hob switched off,
17
Remaining time
1h and 35 min
1min. and 35 sec.
, using
Publicité
