Active AC 621 Manuel D'instructions Et De Mise En Route page 52

7. ASSEMBLY INSTRUCTIONS FOR THE FRONT SUPPORT
WITH WHEELS
The flail mower is delivered with the front support with wheels disassembled. Remove the
cardboard packaging or crate (to be disposed of in an appropriate manner, in accordance
with current regulations in force).
To assemble, proceed as follows :
 Position the support with front wheels and connect the height adjustment piece (Fig. 3 ref.
D) using the screw and washer provided. Fix it to both sides of the bonnet as well using the
screws, washers and spacers provided, as shown in Fig. 3 ref. A.
 Fix the safety bar ( Fig.3 ref. E ) to the special holes on the two front sides of the wheel
support using the screws, washers and nuts provided.
Before switching on ensure that the machine has been fully assembled correctly.
Figure 3
- 52 -