UM_s-MEXT_ME18relC_00_11_18_ML
2.2
OPERATING GENERAL CHARACTERISTICS
2.2.1
Groups of masks and menu structure
The tree structures for moving around the various menus of the controller are shown below.
The masks may be accessed through different menus using the [UP] and [DOWN] keys shown in the following figures with a double arrow
[ENTER] or [ESC] keys are identified by
Power On
Main Mask
Esc
Esc
Esc
Esc
Esc
Esc
Esc
Esc
A.
Main mask See paragraphs 2.3 and 2.4.
B.
The "Unit Menu" displays information such as temperature, pressure and circuit states.
C.
The "Setpoint Menu" is used to set the setpoints for the various available functions. It is possible to set different setpoints depending on the
available function modes (heat sources present, humidifier present, and dehumidifier present, etc.). See paragraph 2.6
D.
The "In/Out menu" shows the status of the digital inputs and values read from the analogue inputs.
It also shows the status of the digital outputs and the voltage supplied to the analogue outputs.
If I/O expansions are present (depending on the configuration parameters), the inputs and outputs of the latter are also shown.
E.
The "Clock menu" is used to set and display the date and time and configure the time bands. See paragraph 2.6
F.
The "Log menu" is used to display the list of alarm events recorded by the unit.
G.
The "User menu" is used to display and set parameters relative to user programming of the unit. For setting the password (G.1) see paragraph
2.2.2
H.
The "Service" menu is used by Service to display and set unit configuration parameters.
I.
The "Factory menu" is used by the manufacturer to display and set unit configuration parameters.
USER MANUAL
.
PRG
key
Esc /
Status pages
Esc
Select Unit
Menu
Select Setpoint
Menu
Select I/O
Menu
Select Clock
Menu
Select Log
Menu
Select User
Menu
Select Service
Menu
Select Factory
Menu
Figure 2-2: Tree for moving around the menus
Esc /
Esc /
Esc /
Esc /
Esc /
User
Esc /
Password
Esc
Service
Esc /
Password
Esc
Factory
Esc /
Password
Esc
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
30
Alarm key
Alarm Menu
Esc /
Display Alarm
Esc /
Unit Menu
Display Unit
Esc /
Setpoint Menu
Display Setpoint
I/O Menu
Esc /
Esc /
Clock Menu
Display Clock
Esc /
Log Menu
User Menu
Esc /
Display User
Esc /
Service Menu
Display Service
Factory Menu
Esc /
Display Factory
. The
Display I/O
Display Log