Remote Keyboard From 200 Metres Up To 500 Metres - Mitsubishi Electric s-MEXT 006-044 Manuel D'utilisation

UM_s-MEXT_ME18relC_00_11_18_ML
5.3.4

Remote keyboard from 200 metres up to 500 metres

If the remote keyboard must be installed over 200m away from the local network (LAN), a power unit must be installed near the remote keyboard.
The remote keyboard cannot be installed more than 500 m away.
The only difference between this and a remote keyboard up to 200 metres is that the power unit must be to terminals 1 and 2 of the T shunt (the one near
the remote keyboard). In this case a 3-wire cable connecting the two T-shunts is sufficient.
If just one chiller is connected, the connection diagram is:
USER MANUAL
Unit
Figure 5-6: Basic scheme to connect a remote keyboard from 200 to 500 metres
Figure 5-7: Electrical diagram to connect a remote keyboard from 200 to 500 metres
3x1 mm
2
shielded and
twisted
3x1 mm SHIELDED
2
AND TWISTED
51
TRANSLATION OF THE ORIGINAL INSTRUCTIONS