Publicité
Les langues disponibles
Les langues disponibles
Guide Rails
If you want to clean the guide rails and cooking chamber thoroughly, you can remove the guide rails
and clean it. With good care and cleaning, your appliance will retain its appearance and remain fully
functional for a long time.
1.
Pull out the front part of the guide rails horizontally. Then you can remove the guide rails as
illustrated in the figure below.
2.
To push the guide rails back into the cooking chamber, the rear part of the guide rails must first
be inserted correctly into the holes of the cooking chamber. Then the guide rails can be pushed
back into the cooking chamber.
Fastening telescopic rails
(The left side is used here as an example. The right side works analogously).
1.
Place points A and B of the telescopic rails horizontally on the outer guide rail.
2.
Turn the telescopic rails counter-clockwise (for the right side: clockwise) by 90 degrees.
3.
Slide the telescopic rails forward, pushing point C onto the lower guide rail and point D onto the
upper guide rail.
EN-22
Publicité
