Publicité
Les langues disponibles
Les langues disponibles
maintenance
EN
12.4
night light replacement
Lights: To replace the halogen bulb in your appliance
you must first remove the lens from the light housing.
To remove the lens from the housing, remove the screw
securing the housing in place (Fig. 1).
Snap the lens out of the housing (including the metal
bracket) (Fig. 2). Do not touch the halogen bulb with
your bare hands.
The oil from your fingertips will reduce the life of the
bulb. With gloved hands gently pull the old bulb from
the socket and replace with the new bulb. Reinstall the
lens, by snapping it back into the housing and bend the
tabs on the front of the housing back in to position.
(Fig. 2)
12.5
blower replacement
WARNING
!
• Risk of fire and electrical shock!
• Turn off the gas and electrical power before servicing this appliance.
• Use only Wolf Steel approved optional accessories and replacement parts with this appliance. Using
non-listed accessories (blowers, doors, louvres, trims, gas components, venting components, etc.) could
result in a safety hazard and will void the warranty and certification.
• Ensure that the fan's power cord is not in contact with any surface of the appliance to prevent electrical
shock or fire damage. Do not run the power cord beneath the appliance.
• The wire harness provided in the blower kit is a universal harness. When installed, ensure that any excess
wire is contained, prevent it from making contact with moving or hot objects.
A. Turn off the power to the appliance.
B. Remove the safety barrier.
C. Unplug the blower from the junction box.
D. Lift the blower up from the slots.
E. Disconnect the slip-on connectors at the motor of the
blower.
F.
Replace the blower in assembly and reverse previous
steps.
G. Ensure that there are no cables touching the blower.
Drywall dust will penetrate into the blower bearings, causing
irreparable damage. Care must be taken to prevent drywall
dust from coming into contact with the blower or its
compartment. Any damage resulting from this condition is not
covered by the warranty policy.
66
W415-2944 / B / 05.22.24
Metal
bracket
SPECIFIC BLOWER INSTALLATION
INSTRUCTIONS MUST BE ADDED HERE.
THIS TEMPLATE MUST BE USED WITH ANY
APPLIANCE THAT OFFERS THE BLOWER AS
AN OPTION OR COMES STANDARD WITH THE
APPLIANCE... AS PER THE STANDARD.
(Fig. 1)
(Fig. 3)
Gloves
Blower clips
Publicité
