Sigma BC 16.12 Mode D'emploi page 17

2. Functions / Properties
– Message "Too Many Signals"
distance from other cyclists (transmitters) and
press any button. Synchronization re-starts. (If the
transmission connection is lost during your trip and
no longer functions, press and hold the MODE 1
button for more than three seconds to start manual
synchronization. "Sync. RESET" flashes on the display)
Increase your

> 3 sec.
– Transport mode
When transported on a bike

rack or in the car (if clicked into the bracket),
the BC 16.12 STS switches to "transport mode"
via an integrated movement sensor. "Transport"
appears on the display. Press any button to exit
this mode.
17