Cleanmaxx CP-CY4503EP-6 Mode D'emploi page 19

❐ Turn the device off and pull the mains plug out of the socket
– if you interrupt using the device,
– if you are fi nished using the device,
– before you change the accessories,
– if an error or fault occurs during operation,
– if liquids or foreign debris have got into the device,
– before a storm,
– before you clean the device parts and accessories.
❐ The device must be switched off when you pull the mains plug out of the socket or
insert it in the socket.
❐ If you wish to remove the mains plug from the socket, never pull on the mains cable,
but always on the plug!
❐ Never move the device by pulling it by the mains cable. Use the handle.
❐ Do not attempt to grease the wheels with lubricants or oil. Otherwise, this may cause
more dust or dirt to accumulate on the wheels.
❐ Keep an eye on the dust container's MAX mark. If the mark has been reached during
use, empty the dust container before you continue vacuuming.
❐ Empty the dust container after every use. The fi lters must also be cleaned regularly
to prevent the motor from being overloaded.
❐ The dust container and all fi lters must be completely dry before placing them back
in the device.
❐ Only use original spare parts provided by the manufacturer.
❐ When not in use, store the device in a cool, dry area that is not accessible to children
and animals.
19