Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Battery
5.1 Battery indication
The latest battery status is symbolised by a three-
stage battery indicator on the display.
Attention!
When the empty battery symbol flashes, then no
more measurements can be performed and the
battery has to be replaced immediately.
5.2 Battery change
The battery may only be replaced
outside of Ex areas.
For replacing the battery the rear cover needs to be
unscrewed.
You may only insert the following types of
batteries:
9 V-block IEC 6LR61 / 6LF22 /
6LP314 (alkaline-manganese)
The connectors, jacks and contacts have to
be kept clean.
Regularly make sure that the battery does not
leak. In case it does you have to remove the
electrolyte completely and insert a new battery.
In case of a longer storage period the
METRAOHM 413 needs to be kept without
battery at a dry and clean place with tempera-
tures between -10° and +70 °C.
Note: Included in the scope of delivery is one
battery. This battery is not to be re-charged. Attemp-
ting to recharge it may cause risk to personal safety
and damage to the equipment. The battery may not
be opened.
Depleted batteries have to be disposed of professi-
onally. Please, return batteries to a local retailer or
municipal recycling depot. Return is free of charge
and required by law.
indication of battery status
replace the battery soon –
few measurements possible
(Battery symbol flashing: no
further measurements admissible!)
25
Publicité
Table des Matières
