Mounting Of The Housing; Connection - BECKER-Antriebe BECK-O-TRONIC 4 Instructions D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions
Connect the motor, yard light/advance warning lamp, light bar-
rier, external key switch and safety edge detector.
Connect the individual pieces of equipment according to the wiring plan.
The light barrier input only functions as object protection.
Caution
Electrical work must be carried out only by qualified electricians. In all cases
the plug is to be removed from the mains before the equipment is connected.
Note
First of all pull the push-in bushes over the connecting cable and push the
push-in bushes into the lower part of the housing after connecting all wires.
24

Mounting of the housing

Open the lid of the control. Remove the keyboard
overlay plug from the control and carefully place
the lid to one side.
Remove the required cut-outs in the bottom part
of the housing.
Note
Slit the edges. Cut them to size so that the
cut-out coverings can be removed more
easily.
Use the enclosed cardboard drilling template to
drill the holes for attaching the unit to the wall.

Connection

Publicité

Table des Matières
loading

Table des Matières