Safety Information - BECKER-Antriebe BECK-O-TRONIC 4 Instructions D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The following safety instructions and warnings are intended to avert hazards and to
prevent damage to property and personal injuries. Please retain for future refer-
ence.
Caution
Attention
Note
Caution
• Work at electrical installations should always be carried out by a qualified
electrician.
• Always observe statutory regulations (health and safety, accident preven-
tion), in particular the regulations of German professional organizations
(BGR 232) or EN 12453 "Safety in use of power operated doors" as well as
the applicable valid VDE or EN standards.
• The system fitter is responsible for correct assembly, instructing the op-
erator and issuing the CE mark.
• The operator has to ensure that the system is only operated when fully
functional and that the operability of the safety devices is regularly in-
spected by a technical expert.
• If the mains connection cable is damaged, it has to be replaced immedi-
ately by a qualified electrician.
• When using roller shutters the customer has to ensure that the roller shut-
ters are protected and, e.g., that dangerous situations cannot arise if the
end limits are overrun.
• The estimated service life of the control is 100.000 operations.

Safety Information

Denotes a potentially hazardous situation. If this is not
avoided, injuries may result.
Denotes a potentially hazardous situation. If this is not
avoided, the product or something in its vicinity may be
damaged.
Denotes user tips and other useful information.
DE
GB
FR
NL
19

Publicité

Table des Matières
loading

Table des Matières