Iii- Description Of The Panel Control; Iv- Setting Temperatures; Description Of The Control Panel; Setting The Temperature - Eurocave 92 Série Mode D'emploi

II - Description of the control panel
Open door alarm
Lighting
mode
Temperature Cold circuit
display indicator
III - Setting the temperature
The temperature of your wine cabinet is set from the control panel.
• Press and hold down the
Pres the or keys to select the desired temperature. The setting can then be seen (the temperature flashes).
Confirm by pressing the
• When the temperature flashes, you have 5 seconds to modify the set temperature by pressing the
automatically returns to the temperature measurement.
N.B.: The tactile keys are very sensitive, there is no need to apply heavy pressure, a light touch is sufficient for the command to be entered.
Remember to remove your finger from the panel between each press.
Recommended setting range for wine maturing: 10 to 14°C (50 to 57°F).
The default setting is 12°C / 54°F (ideal wine maturing temperature).
On the other hand, this setting can be set at 5 to 20°C (41 to 68°F).
Turning your wine maturing cabinet into a wine serving cabinet
You can use your appliance as a wine serving cabinet to bring your red or white wines to the correct serving temperature
(setting range from 5 to 20°C (41 to 68°F).
- For white wine: the recommended setting range is 5° to 10°C (41 to 50°F),
- For red wine: the recommended setting range is 15° to 18°C (59 to 64°F).
This cabinet can therefore be used to serve specifically white wine or red wine.
N.B.: to function correctly, your cabinet must be placed in a room in which the temperature is
0 to 35°C (32 to 95°F).
When significant changes are made to the set temperatures, it may take several hours for the temperature in your wine cabinet to stabilise and for your
wine cabinet to display the desired temperatures.
Sensor fault
alarm
Temperature
Temperature
alarm
zone
Hot circuit Humidity
indicator display
, the previous set temperature will flash.
key.
6- l
ayout
Charcoal filter
alarm
Humidity level
alarm
- s
torage
Selection and
Selection and
setting key
confirmation key
Stand-by key Charcoal filter
reset key
or key. Otherwise, the display
Lighting
selection key
11
GB