Publicité
Les langues disponibles
Les langues disponibles
Before connecting the appliance to the mains
supply, place it on the location where it will later
on be installed and leave it for about 2 hours,
which will reduce a possibility of malfunctions in
the cooling system due to transport handling.
Clean the appliance, and be thorough, especially
in the interior (See Cleaning and Maintenance).
In case the interior accessories are not correctly
placed, rearrange them as described in chapter
"Description of the Appliance".
Instructions for use
These instructions for use are intended for the user.
They describe the appliance and its correct and safe
use. They were prepared for various types of
refrigerators therefore you might find in it some
functions that do not apply to your appliance and
description of the accesories that your appliance
does not include.
Mounting instructions
Integrated appliances are equipped with instructions
for mounting the appliance into the kitchen unit.
The appliance should be mounted by qualified
technician and instructions are for his use only.
We care for the environment
Our products use environmentally friendly
packaging, which can be either recycled or
disposed of in an environmentally friendly
manner. To this end, individual packaging
materials are clearly marked.
These instructions are printed either on recycled
paper or chlorine free bleached paper.
When your appliance finally wears out, please try
not to burden the environment with it; call your
nearest authorised service agent. (See Disposing
of the Worn Out Appliance)
Tips for energy savings
Try not to open the door too often, especially
when the weather is wet and hot. Once you open
the door, mind to close it as soon as possible.
This is especially important if you have an upright
model.
Check periodically if the appliance is provided
with sufficient cooling (undisturbed circulation of
air through the bottom rail openings).
Use higher thermostat settings only when
required or recommended.
Before loading the appliance with packages of
fresh foods, make sure they are cooled to
ambient temperature.
Ice and frost layer increase energy consumption,
so do clean the appliance as soon as the layer is
3-5 mm thick.
If the gasket is damaged or if it turns out that
the sealing is poor, the energy consumption is
substantially higher. To restore efficiency,
replace the gasket.
Publicité
