hergom Nature 70 Instructions D'installation, De Service Et D'entretien page 30

8 - ASSEMBLING THE CHIMNEY
To make it easier for the installers to assemble the
chimney, the position of the outlet collar can be
adjusted on the Nature fireplace.
Once the deflector has been removed, the smoke
outlet collar can be reached.
1. Remove the four screws holding the collar to
the top of the fireplace (fig. 11).
2. Remove the chimney by pulling it down
ATTENTION! HOLD THE FIREPLACE WITH ONE
HAND BEFORE RELEASING THE LAST SCREW;
IF NOT THE CHIMNEY OUTLET MAY FALL (Fig.
12).
3. Turn the chimney outlet 180° (fig.13).
FIG. 11
FIG. 12
FIG. 13
4. Secure the chimney to the top again
ATTENTION! MAKE SURE THE COLLAR IS
CORRECTLY ATTACHED TO THE TOP (Fig.14).
FIG. 15 - Original position
FIG. 16 - Original position
FIG. 17 - Changed position
FIG. 14