Clean the deflector on both sides at least once
each season using a brush. This will facilitate the
transmission of air through the plate and avoid its
deterioration to a great extent.
Replace the deflector following the steps indicated
above in reverse order.
JOINTS AND SEALS
It is advisable to perform a visual inspection of the
door joints at the beginning and in mid-season to
ensure they are airtight. If necessary, contact our
Distributor to supply you with the appropriate
seal, along with assembly instructions.
7 - SEGURIDAD
WARNING!
Gas/log/pellet units get hot when in use.
Consequently, owners must act with precaution
and keep at a distance. Especially keep children,
the elderly and other people who require special
supervision, as well as pets, away from the
fireplace when it is in use.
Make sure that children or other people who
are not familiar with how the device works are
supervised by responsible people when they are
near the fireplace.
In order to prevent burns or children or other
people from coming near the appliance, use a fire
grille or screen.
There are potential risks that must be taken into
account when operating your solid fuel fireplace,
whatever the brand. The said risks can be minimised
if the instructions and recommendations included
in this manual are followed.
• Keep any flammable material (furniture,
curtains, clothes...) away from the fireplace, at
a safe distance of at least 0,90m. (Fig. 10)
• Ash should be emptied into a metal container
and immediately removed from the house.
• Do not use flammable liquids to light the
fireplace. Keep any type of flammable liquid
(petrol, gasoline, alcohol,....) at a distance from
the fireplace.
• Periodically inspect the chimney and clean
whenever necessary. Also inspect the state of
joints, glass, screws...
• Do not install near walls that are combustible
or that feature any type of lining that may be
damaged or deformed by high temperatures
(varnish, paint...). Precautions should also be
taken to prevent placing the hot air grilles on
combustible items.
• Protect your hands with a glove or other
insulating material because, during operation,
the opening and closing handle will be hot.
When installing the compact NATURE fireplace,
follow the installation advice below for your own
safety:
1. The base where you are going to place your
NATURE fireplace must be flat and provide a
perfect seat for your fireplace. The base must
be built using heat resistant materials.
2. The gap in which your NATURE fireplace will be
installed must be completely free from debris
and waste materials that may ignite when the
fireplace is working.
3. The inside of the gap where the NATURE
fireplace is to be installed will be appropriately
insulated or built of materials that resist high
temperatures.
4. If insulation must be installed inside the gap,
do not cover the ventilation grille.
5. Never wrap the insert fireplace in insulation
material as this will damage it.
FIG. 10