Publicité
Les langues disponibles
Les langues disponibles
4
3
Slide the lug (2) on the front drive
N
tube (3) into the slot (4) in the
coupling sleeve as far as stop – if
necessary, turn the front drive
tube (3) back and forth while
pushing it home.
5
6
When correctly installed, the red
line (5) (arrow point) must be flush with
the end of the coupling sleeve.
Tighten down the star knob (6)
N
firmly.
Attach the shoulder strap to the
N
carrying ring.
HT 56 C
All manuals and user guides at all-guides.com
Cutting Attachment
2
A cutting attachment consists of the saw
chain, guide bar and chain sprocket.
The cutting attachment that comes
standard is designed to exactly match
the pole pruner.
1
a
The pitch (t) of the saw chain (1),
–
chain sprocket and the nose
sprocket of the Rollomatic guide bar
must match.
The drive link gauge (2) of the saw
–
chain (1) must match the groove
width of the guide bar (3).
If non-matching components are used,
the cutting attachment may be damaged
beyond repair after a short period of
operation.
Chain Scabbard
2
The scope of supply includes a bar
scabbard that matches the cutting
attachment.
3
If guide bars of different lengths are
mounted to the pole pruner, always use
a chain scabbard of the correct length
which covers the complete guide bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
English
11
Publicité
