Publicité
Les langues disponibles
Les langues disponibles
English
Cutting above obstacles
The unit's long reach makes it possible
to prune branches that are overhanging
obstacles, such as rivers or lakes. The
tool angle in this case depends on the
position of the branch.
Cutting from a lift bucket
The unit's long reach enables cutting to
be performed next to the trunk without
the risk of the lift bucket damaging other
branches. The tool angle in this case
depends on the position of the branch.
10
All manuals and user guides at all-guides.com
30° angle drive (special accessory)
1
2
The angle drive keeps the cutting
attachment at an angle of 30° to the
drive tube.
The angle drive may be adjusted on the
drive tube to the following positions only:
1
For cross-cutting vertical branches
and bushes.
2
For a better view of the cutting
attachment.
Assembling the Unit
The unit features a split drive tube that
helps save space during transportation.
It unit can be easily disassembled for
transportation – see "Transporting the
Unit".
Connecting the Drive Tube
WARNING
Do not mount KombiTools – only use the
drive tube with splined shaft supplied
with the machine.
Pull the cap (1) off the end of the
N
front drive tube and keep it in a safe
place for later use – see "Storing the
Machine".
Put the powerhead on the ground so
N
that it rests on the machine support.
1
HT 56 C
Publicité
