Removing The Middle Hinge; Removing The Lower Hinge - Dometic DMC4101 Manuel D'installation Et D'utilisation

DMC Refrigeratorss

6 .2 Removing the Middle Hinge

This section describes removing the fresh food door,
middle hinge bracket, and lock assembly.
q
9 Removing the Middle Hinge Bracket, Lock Assembly, and Door
Lock Assembly
q
Middle Hinge Bracket
w
I Keep all the hardware and screws for reinstallation.
1. At the top of the fresh food door, use a Phillips
screwdriver to remove the two screws that secure the
lock assembly, and the two screws that secure the
middle hinge bracket.
2. Pull up on the hinge to remove it from the door.
3. Depress the door handle. Gently pull the door
upward off the lower hinge to release the magnetic
seal and remove the door.
4. Lay the door on a soft surface, finish side down.
EN
w
e
r
Fresh Food Door
e
Lower Hinge Bracket
r

6 .3 Removing the Lower Hinge

This section describes removing the lower hinge bracket
and leveling feet.
q
10 Removing the Lower Hinge Bracket and Leveling Feet
Hinge-Side Leveling Foot
q
Lower Hinge Bracket
w
Keep all the hardware and screws for reinstallation.
I
1. With the refrigerator tilted back slightly to access the
bottom, remove the front leveling feet by turning
them counter-clockwise until they fully disengage.
2. Use a 10 mm socket wrench to remove all the screws
securing the lower hinge to the door stop bushing.
Keep the hinge-side leveling foot with the lower
I
hinge bracket.
Door Swing Reversal
e
r
q
Door Stop Bushing
e
Mounting Screws
r
w
r
9