Installing The Refrigerator; Changing The Door Hinge; Replacing The Door Panel - Dometic CRX CRE 0050 Instructions De Montage

Installing and connecting the refrigerator
A
NOTICE!
Do not switch on the device until it stood in an upright position for a
period of 4 hours.
➤ Mount the outlet port (fig. 6 2, page 5) aligned to the front or to the back
according to the desired outlet direction.
➤ Remove the drain plug (fig. 6 1, page 5) inside the refrigerator.
7.4

Installing the refrigerator

Proceed as follows to install the refrigerator:
➤ If you wish to drain the condensate through a hose:
Mount the outlet port (see chapter "Mounting the outlet port (optional)" on
page 21)
➤ Undo the transport lock (chapter "Releasing the lock" on page 28).
➤ Open the refrigerator door.
➤ Remove the blanking plugs (fig. 7 2, page 6).
➤ Push the refrigerator into the recess.
➤ Fix the refrigerator in place using suitable screws (fig. 7 1, page 6).
➤ Press the blanking plugs (fig. 7 2, page 6) into the openings.
7.5

Changing the door hinge

You can change the hinge of the door, so that it opens to the left rather than the right.
➤ Proceed as shown in fig. 8, page 7 to fig. 9, page 7, to change the hinges.
7.6

Replacing the door panel

A
NOTICE! Risk of damage!
The door panel must be replaced only when the refrigerator is upright.
22
CRE
EN