Adjusting The Shelves; Installing The Shelf; Care And Maintenance - Dometic DMC4101 Manuel D'installation Et D'utilisation

Care and Maintenance

7 .3 Adjusting the Shelves

This section describes how to remove and install the
refrigerator shelves.
7 .3 .1 Removing a Shelf
q
18 Removing a Refrigerator Shelf
Shelf Lock
q
1. Disengage both shelf locks underneath the shelf:
a. Insert the tip of a flathead screwdriver into the slot
between the left shelf lock and the wall liner.
NOTICE: Do not rest the screwdriver against the liner
for leverage, or force the screwdriver against the liner, as
damage to the liner may occur.
b. Gently rotate the screwdriver to slide the lock
away from the wall liner.
c. Repeat steps a and b for the right shelf lock.
2. Pull on the front edge to slide the shelf out.
14
w
Screwdriver
w

7 .3 .2 Installing the Shelf

w
19 Installing a Refrigerator Shelf
Groove in Wall Liner
q
1. Be sure both shelf locks are disengaged.
2. Align the shelf with the grooves in the wall liner, and
slide the shelf into the grooves.
3. To engage the left lock, push the end of the left lock
toward the left refrigerator wall until it is flush with the
end of the shelf bracket and against the wall liner.
4. Repeat step 3 for the right lock.
8 Care and Maintenance

WARNING: ELECTRICAL SHOCK, FIRE, AND/
OR EXPLOSION HAZARD . Failure to obey the
following warnings could result in death or
serious injury:
• Always disconnect the refrigerator from power before
cleaning and/or servicing.
• Maintenance not included in this Care and
Maintenance section must be done by a qualified
service person only.
DMC Refrigeratorss
q
Shelf Lock
w
EN