Reinstalling The Handles; Changing The Door Stop Bushing - Dometic DMC4101 Manuel D'installation Et D'utilisation

DMC Refrigeratorss

6 .6 Reinstalling the Handles

This section describes swapping and reinstalling the
handles.
w
13 Reinstalling the Handles and Decor Well Covers
Door Handle
q
1. Rotate the original freezer handle 180°.
2. While using a screwdriver to push in the handle's
plunger pin in completely and depressing the handle
latch, place the handle into the fresh food door
handle well.
I Be sure the handle's plunger pin is inserted in the
former hinge hole.
3. Depress the handle latch to reinstall the two Phillips
head screws to secure the handle.
4. Repeat steps 1 through 3 to secure the original fresh
food door handle to the freezer door.
EN
q
Decor Well Cover
w
6 .7 Changing the Door Stop
Bushing
This section describes removing and replacing the door
stop bushing.
w
14 Reinstalling the Bushing
Door Stop Bushing
q
1. Remove the door stop bushing from the bottom of
the fresh food door.
2. Use a Torx driver to install the new replacement door
stop bushing and new screws on the opposite side of
the fresh food door.
3. Repeat steps 1 and 2 for the freezer door.
I The new door stop bushing should not hang over
the door edge.
Door Swing Reversal
q
New Door Stop Bushing
w
11