MINN KOTA TALON Instructions D'installation page 20

CONNECTING THE BATTERIES
• The Talon draws a small amount of residual current from the battery even when not in use. If the Talon is not be used for more
than five days, or while the battery/batteries are being charged, the Talon power leads should be disconnected from the battery.
It is recommended the Talon be connected to the Starting Battery through a battery selector or power disconnect switch. This
will disconnect power to the Talon when the Power Switch is "off". If you are not using a battery selector/switch, the Talon may be
connected directly to the starting battery.
• Keep lead wire connections tight and solid to the battery or switch terminals.
• The Starting Battery should be located in a ventilated compartment to avoid sparks from combustible materials.
20 | minnkota.johnsonoutdoors.com
WARNING
©2024 Johnson Outdoors Marine Electronics, Inc.