SilverCrest STS 850 E3 Mode D'emploi page 11

Interrupting the toasting process
If you wish to interrupt the toasting procedure, press the button "Stop"
The toaster switches itself off and the bread slices are ejected upwards.
Warming function
The warming function enables you to warm bread without browning it. As
an example, for toast that has gone cold. The bread is only briefly warmed.
1) Insert the bread and press the operating button 1 downwards.
2) Press the "Warm up" button
3) When the bread has been reheated, the appliance switches itself off
automatically and the slices are ejected upwards.
NOTE
► Press the button "Warm up" button
function. The integrated control lamp goes out and the warming process
switches to a normal toasting process.
Defrost function
By pressing the button "Defrosting"
toasted. With this, the toaster slowly warms the bread. Activating the defrost
function will allow the frozen bread to achieve the same browning level as when
you toast fresh bread.
1) After setting the desired browning level, insert the bread into the toaster
slots 8.
2) Press the operating button 1 downwards.
3) Press the button "Defrosting"
4) When the defrosting and toasting process is finished, the toaster switches itself
off automatically, the control lamp integrated in the button "Defrosting"
goes out and the bread slices are ejected to the top.
NOTE
► Press the "Defrost" button
The integrated control lamp goes out and the defrost process switches to
a normal toasting process.
■ 8 │ GB │ IE
4. The integrated control lamp lights up.
4 again to switch off the warming
3, also frozen bread can be thawed and
3. The integrated control lamp glows.
3 again to switch off the defrost function.
5.
3
STS 850 E3