L.B. White CP125AK Manuel Du Propriétaire Et Instructions page 14

MAINTENANCE (cont.)
NOZZLE
Combustion Chamber
Screw
Burner Head
Fuel Line Hose
Air Line Hose
Nozzle Face
Nozzle
Air Line Fitting Fuel Line Fitting
Figure 13 – Nozzle Replacement For Models CP125AK and CP170AK
CLEAN NOZZLE AS NEEDED
(For Models CP125AK and CP170AK only)
- Remove upper shell (See Air Intake Filter, page 12).
- Remove fan blade (See Fan Blades).
- Remove fuel and air line hoses from burner head.
- Remove ignitor wire from spark plug.
- Remove three screws using medium Phillips screwdriver
and remove burner head from combustion chamber.
- Remove spark plug from burner head using medium
Phillips screwdriver.
- Carefully remove nozzle from burner head using 5/8"
socket wrench.
- Blow compressed air through face of nozzle
(This will remove any dirt).
- Reinstall nozzle into burner head and tighten firmly (80-
100 inch-pounds).
- Reinstall spark plug into burner head.
- Attach burner head to combustion chamber.
- Attach ignitor wire to spark plug. Attach fuel and air line
hoses to burner head.
- Reinstall fan blade and upper shell.
(For Model CP210AK only)
- Remove upper shell (See Air Intake Filter, page 12).
- Remove fan blade (See Fan Blades).
- Remove fuel and air line hoses from adapter nozzle.
- Remove ignitor wire from spark plug.
- Remove four screws using medium Phillips screwdriver and
remove bracket burner from combustion chamber.
- Remove spark plug from bracket spark using medium Phillips
screwdriver.
- Carefully remove nozzle from adaptor nozzle using 5/8"
socket wrench.
- Blow compressed air through the face of nozzle (this will
4 13
Ignitor Wire
Spark Plug
Burner Head
Combustion Chamber
Bracket Burner
Spark Plug
Ignitor Wire
Screw
Fuel Line Fitting
Air Line Hose
Air Line Fitting
Bracket Burner
Nozzle
Fuel Line Fitting
BracketSpark
Figure 14 – Nozzle Replacement CP210AK
remove any dirt).
- Reinstall nozzle into adaptor-nozzle and tighten firmly (80-
110 inch-pounds).
- Reinstall spark plug in bracket spark.
- Attach bracket burner to combustion chamber.
- Attach ignitor wire to spark plug.
- Attach fuel and air line hoses to adaptor nozzle.
- Reinstall fan blade and upper shell.
Nozzle Face
Spark Plug